Status changed to Confirmed. However, this depends on the driver kernel module and hardware support for your network interface card. Sign up using Email and Password. January 10th, 7. While the above command does fix the MBR, and sometimes that is enough, there still might be an error with the system partition’s boot sector and Boot Configuration Data BCD. I tried to connect to a 1Gbit EEE switch but it failed, syslog says: I tried several driver version, but none of them worked.

Uploader: Kajizahn
Date Added: 4 February 2006
File Size: 49.39 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 71799
Price: Free* [*Free Regsitration Required]

JMicron JMC2xx LAN Driver – – Linux

Some routers also do not support at all ports Gigabit. Originally posted by xiaoassasin View Post. Sign up using Email and Password. Originally posted by KingofKings View Post.

Caysho caysho wrote on Make sure it’s set to mjc25x from the SSD and not the Lan. Caysho, thank you for your comment.

Download it and run a free driver scan here. Driuchatyi Nikolay, it will help immensely if you filed a new report via a terminal: Post as a guest Name.


Ubuntu Manpage: jme — JMicron Gigabit/Fast Ethernet driver

Jim, I “solved” the issue by disabling gigabit ethernet on the network card with: I’m at a loss here. If the test did not allow you to test to the issue ex.

This bug affects 6 lknux. The accepted range is 1 to ; the default is us. The user can manually override the autoselected mode by adding media options to rc.

JMicron JMC25x/JMC26x Ethernet Adapter for Linux

Setting the network speed to mbit establishes a working mbit connection. Here is the output off “ethtool -i eth0”: Last edited by SmogHog ; Status changed to Confirmed 2. Wenjay Chang wenjay-chang wrote on My jmc network card seems to have problems with gigabit networks. Thank you so much!

Now I want to speed up the boot process. The known workaround for the issue is to force manual link configuration with baseTX instead of relying on auto-negotiation.

Try to update or reinstall the JM driver from the Sager site. The fact that the drivers are totally broken deserves a different bug–they were working for a brief while until How would I go about flashing the firmware?


I ran sudo ethtool -s eth0 speed duplex full and the link came up.

Sager JMC25X problem. Since you have rev 03you’re very much likely running into this issue. I still get a maximum speed of mbit. When using a managed switch Zyxel GS, enabling the EEE at the switch port will prevent connection and the PC indicates that the ethernet cable is disconnected.


JMicron Network Card Drivers for Linux

The accepted range is 1 to ; the default is 8. Jmc52x ran the setup and restarted. Tags for this Thread gigabitjmc However it was fixable by downloading and manually compiling a new version of the jme drivers from here: